Fix Epson WF-4830/4820 error code 000020, 000025, 000032,…

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

Fix Epson WF 4830/4820 series error code 000020, 000030

Solved CR PID driving time error, error code 000020

Solved CR load position driving time error, error code 000030

  • Possible cause: 
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 100065?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830/4820 series error code 000021, 000031

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID excess load error, error code 000021

  • Possible cause: 
    •  The CR Motor stopped running in the middle of the operation
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
        •  Disengaging, fraying, jumping of the Timing Belt
        •  Crack or disengaging of the gear, or the APG lever interferes with the CR
    •  Failed to read the CR Encoder
      • 2. Contamination of the CR Scale
      • 3. Failure of the CR Motor (not completely broken)
      • 4. Failure of the Main Board

Solved CR load position excess load error, error code 000031

  • Possible cause: 
    •  The CR Motor stopped running in the middle of the operation
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
        •  Disengaging or breakage of the gears
        •  Disengaging, fraying, jumping of the Timing Belt
    •  Failed to read the CR Encoder
      • 2. Contamination of the CR Scale
      • 3. Failure of the CR Motor (not completely broken)
      • 4. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000021, 000031?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Check the load applied to the CR by moving it by hand.
    5.  Check if the lubricant on the CR Guide Shaft is adequate.
    6.  Check the CR drive mechanism.
    7.  Clean the CR Scale if it is contaminated.
    8.  Replace the CR Motor with a new one.
    9.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-error-code-on-printer-CR

Fix Epson WF 4830/4820 series error code 000022, 000032

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID excess speed error, error code 000022

Solved CR load position excess load error, error code 000032

  • Possible cause: 
    •  Failed to read the CR Encoder
      • 1. Contamination of the CR Scale
      • 2. Damage or skew of the CR Encoder FFC
      • 3. Failure of the CR Encoder
    •  Failure of the CR Motor Driver
      • 4. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000022, 000032?

    1.  Clean the CR Scale if it is contaminated.
    2.  Check the FFC of the CR Encoder.
    3.  Replace the CR Encoder with a new one.
    4.  Replace the Main Board with a new one.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830/4820 series error code 000023, 000033

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID reverse error, error code 000023

  • Possible cause: 
    •  Operation failure of the CR Motor, stopped by obstacles
      • 1. CR was stopped by;
        • Obstacles such as jammed paper
        • Interfere with the Ink System Unit
        • Disengaging or breakage of the gears
    •  Failed to read the CR Encoder
      • 2. Jumping of the CR Timing Belt
      • 3. Contamination of the CR Scale
      • 4. Damage or skew of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the Main Board

Solved CR load position reverse error, error code 000033

  • Possible cause: 
    •  Operation failure of the CR Motor, stopped by obstacles
      • 1. CR was stopped by;
        • Obstacles such as jammed paper
        • Overload of the mechanism
        • Interfere with the Ink System Unit
    •  Failed to read the CR Encoder
      • 2. Jumping of the CR Timing Belt
      • 3. Contamination of the CR Scale
      • 4. Damage or skew of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000023, 000033?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the CR Encoder FFC or the connector.
    6.  Replace the CR Encoder with a new one.
    7.  Replace the Main Board with a new one.

— Fix Epson WF 4830, 4820 series error code 100065, 100066, 100074,… click here

Epson-WF-4830-4820-series-wiper-driver-mechanism

Fix Epson WF 4830/4820 series error code 000024

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID lock error, error code 000024

  • Error message: CR PID lock error
  • Possible cause: 
    • The CR Motor did not run, or the CR could not move smoothly
      • 1. Overload of the CR
    • Failed to read the CR Encoder
      • 2. The Timing Belt become frayed or jumping
      • 3. Contamination of the CR Scale
      • 4. Disconnection, break, skew or damage of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the CR Motor (the lead wire is broken or the connector is disconnected)
      • 7. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000024?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Move the CR by hand to see if it moves smoothly without getting stuck.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the connector and the CR Encoder FFC for damage.
    6.  Replace the CR Encoder FFC with a new one.
    7.  Check the connector of the CR Motor.
    8.  Replace the CR Motor with a new one.
    9.  Replace the Main Board with a new one

Fix Epson WF 4830/4820 series error code 000025

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID speed fall error, error code 000024

  • Error message: CR PID speed fall error
  • Possible cause: 
    •  Operation failure of the CR
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
    •  Failed to read the CR Encoder
      •  The Timing Belt become loosened or jumping
      •  Contamination of the CR Scale
      •  Damage or skew of the CR Encoder FFC
      •  Failure of the CR Motor
      •  Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000025?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the connector of the CR Encoder FFC.
    6.  Replace the CR Motor with a new one.
    7.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

About NGUYEN DANG NAM

Check Also

Epson-WF-4830-4820-series-error-code-message-4

Fix Epson WF 4830, 4820 series I/S PID error codes

— Fix Epson XP 15000 | XP series error codes list, click here This section …

Leave a Reply

Your email address will not be published. Required fields are marked *