Fix Epson WF 4830, 4820 series I/S PID error codes

— Fix Epson XP 15000 | XP series error codes list, click here

This section describes how to check the fatal error code, description, and the possible causes.

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

Fix Epson WF 4830/4820 series error code 000100, 000110

Solve IS PID driving time error, error code 000100

Solve IS load position driving time error, error code 000110

  • Possible cause:
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 000100, 000110?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830/4820 series error code 000101, 000111

Solve IS PID excess load error, error code 000101

Solve IS load position excess load error , error code 000111

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  The IS Motor stopped running in the middle of the operation
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Failure of the IS Motor (not completely broken)
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000101, 000111?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for disengage or crack.
    3.  Clean the IS Scale if it is contaminated.
    4.  Replace the Ink System Unit with a new one.
    5.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-I-S-printer-error-codes

— Epson WF 4830, 4820 Series Paper feed mechanism, click here

— Fix Epson WF-4830/4820 Series error code 100001, 100005, 100010,… click here

Fix Epson WF 4830/4820 series error code 000102, 000112

Solve IS PID excess speed error, error code 000102

Solve IS load position excess speed error , error code 000112

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  Failed to read the IS Encoder
      • 1. Contamination of the IS Scale
      • 2. Damage or skew of the IS Encoder FFC
      • 3. Failure of the IS Encoder
    •  Failure of the IS Motor Driver
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000102, 000112?
    1.  Clean the IS Scale if it is contaminated.
    2.  Check the IS Encoder FFC or the connector.
    3.  Replace the Ink System Unit with a new one.
    4.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 000103, 000113

Solve IS PID reverse error, error code 000103

Solve IS load position reverse error , error code 000113

— Solving Epson WF 4830/4820 Series error codes, click here

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  Operation failure of the IS Motor, stopped by obstacles
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Damage or skew of the IS Motor cable/Encoder FFC
      • 4. Failure of the IS Encoder
      • 5. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000103, 000113?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for tooth breakage or disengaging.
    3.  Clean the IS Scale if it is contaminated.
    4.  Check the cable/FFC of the IS Motor/Encoder.
    5.  Replace the Ink System Unit with a new one.
    6.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-IS-PID-error-code

Fix Epson WF 4830/4820 series error code 000104

Solve IS PID lock error, error code 000104

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Error message: I/S PID lock error
  • Possible cause:
    •  The IS Motor did not run
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Break, skew or damage of the IS Motor cable/Encoder FFC
      • 4. Failure of the IS Encoder
      • 5. Failure of the IS Motor (the lead wire is broken or the connector is disconnected)
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000104?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for tooth breakage or disengaging.
    3.  Clean the IS Scale if it is contaminated.
    4.  Check the cable/FFC of the IS Motor/Encoder.
    5.  Replace the Ink System Unit with a new one.
    6.  Replace the Main Board with a new one

— About Epson XP 15000 | XP series, click here

About NGUYEN DANG NAM

Check Also

Epson-WF-4830-series-ASF-error-codes-00008x-00009x

Fix Epson WF 4830 series error code 000080, 000084, 000093,…

The fatal error code is stored in the EEPROM on the Main Board and can …

Leave a Reply

Your email address will not be published. Required fields are marked *