Secure and Protection Epson WF 4830/4820 Series

This section explains specific points of note regarding packaging after repairs are completed.

— Route Cables around Epson WF-4830, 4820 Series, click here

— Epson WF-4830/4820 Series handle cautions when disassembly, click here

Securing the CR Unit and Pad, Sheet, CR on Epson WF-4830/4820 Series

Epson-WF-4830-4820-series-secure-CR-unit.jpg

  • Purpose
    •  To prevent damaging the CR Unit by shock during transportation.
    •  To prevent ink spattering from the needle part on the Printhead due to vibration during transportation.
  • Risk if it is not performed.
    •  Fatal error caused by the damage of the CR Unit.
    •  Contaminate the bottom of Scanner Unit and inside of CR Unit due to vibration during transport.
  • Preparation
    • A) Prepare a piece of packing tape. (Length: 140 mm, width: 22 mm, fold on the end: 5 mm)
    • B) Prepare a piece of packing tape. (Length: 200 mm, width: 22 mm, fold on the end: 5 mm)
    • Prepare the Pad, Sheet, CR (EPSON Part Code: 5147220).
  • Method
    • STEP 1. Turn off the printer and move the CR Unit to the Home side fully.
    • STEP 2. Secure the Pad, Sheet, CR with the packing tape A as shown in Figure above.
    • STEP 3. Apply the folded end of the packing tape B on the Housing Right as shown in Figure above.
    • STEP 4. Apply the unfolded end of the packing tape B on the left side of the CR Unit to secure the CR Unit.

— Repair Epson WF-4830/4820 Series Exterior Components, click here

— Handle Epson WF 4830/4820 Series Cautions when installing, click here

Securing the Securing the ADF/SCN Unit on Epson WF-4830/4820 Series

  • Purpose: To prevent damaging the ADF/SCN Unit by shock during transportation.
  • Risk if it is not performed: Scanner fatal error caused by the damage of the ADF/SCN Unit.
  • Preparation:
    • Prepare four pieces of packing tape. (Length: 150 mm, width: 22 mm, fold on the end: 7 mm)
  • Method:
    • Secure the ADN/SCN Unit as shown below.

Epson-WF-4830-4820-series-secure-ADF-Scanner-unit.jpg

Protection of SCN Unit

Epson-WF-4830-4820-series-protect-Scanner-unit.jpg

  •  Purpose: To prevent the SCN Unit be worn by shock during transportation.
  •  Risk if it is not performed: Damage to the SCN Unit by shock during transportation.
  •  Preparation
    •  Prepare two pieces of packing tape. (Length: 95 mm, width: 14 mm, fold on the end: 5 mm)
    •  Scanner Cover Pad
  •  Method:
    Place the Scanner Cover Pad in position shown in Figure above and secure with the packing tape.

Securing and protecting of Stacker Assy

Epson-WF-4830-4820-series-protect-Stacker-Assy.jpg

  •  Purpose: To prevent scratching or damaging the Stacker Assy by shock during transportation.
  •  Risk if it is not performed: Damage to the Stacker Assy by shock during transportation.
  •  Preparation:
    • Prepare three pieces of packing tape: (Length: 110 mm, width: 22 mm, fold on the end: 5 mm)
  •  Method:
    • STEP 1. Pull out the Stacker Assy, and apply the packing tape to protect the Stacker.
    • STEP 2. Close the Stacker Assy, and then secure the Stacker Assy and the Paper Cassette 1st with the packing tape.

— Fix Epson WF 4830, 4820 series error code 000020, 000025, 000032,… click here

— Fix Epson WF-4830/4820 error code 100016, 100020, 100054, 100077… click here

Securing the Paper Cassette

  •  Purpose: To prevent damaging the Paper Cassette by shock during transportation.
  •  Risk if it is not performed:  Damage to the Paper Cassette by shock during transportation.
  •  Preparation:
    • A) Prepare two pieces of packing tape.
      (Length: 140 mm, width: 22 mm, fold on the end: 5 mm)
    • B) Prepare two pieces of packing tape. (WF-4830 Series only)
      (Length: 150 mm, width: 22 mm, fold on the end: 5 mm)

Epson-WF-4830-4820-series-secure-Paper-cassette.jpg

  •  Method:
    • STEP 1. Apply the packing tape A to secure the Paper Cassette 1 as shown in above Figure
    • STEP 2. Apply the packing tape B to the Stacker Assy and the Paper Cassette 2 as shown in above Figure(WF-4830 Series only)

Securing the Panel Assy

Epson-WF-4830-4820-series-secure-Panel-Assy.jpg

  •  Purpose: To prevent damaging the Panel Assy by shock during transportation.
  •  Risk if it is not performed: User not able to use because of damage to the Panel Assy
  •  Preparation
    • Prepare two pieces of packing tape.
      (Length: 90 mm, width: 22 mm, fold on the end: 7 mm)
  •  Method: Secure the Panel Assy as shown above

Securing the ADF Paper Support

  •  Purpose: To prevent damaging the ADF Paper Support by shock during transportation.
  •  Risk if it is not performed: Damage to the ADF Paper Support due to vibration during transport.
  •  Preparation:
    • Prepare a piece of packing tape.
      (Length: 60 mm, width: 22 mm, fold on the end: 7 mm)
  •  Method: Secure the ADF Paper Support as shown below.

Epson-WF-4830-4820-series-secure-ADF-Paper-Support.jpg

Protection of the ADF Document Support

Epson-WF-4830-4820-series-protect-ADF-Document-Support.jpg

  •  Purpose: To prevent rubbing the ADF Document Support by shock during transportation.
  •  Risk if it is not performed:  Damage to the ADF Document Support due to vibration during transport.
  •  Preparation
    • A) Prepare two pieces of packing tape.
      (Length: 90 mm, width: 22 mm, fold on the end: 5 mm)
    • B) Prepare a piece of packing tape.
      (Length: 140 mm, width: 22 mm, fold on the end: 5 mm)
  •  Method
    • STEP 1. Apply the packing tape A to the ADF Cover Rear and the ADF Cover Front as shown in Figure above
    • STEP 2. Move the Edge Guide to the center.
    • STEP 3. Secure the Edge Guide with the packing tape B as shown in Figure above

About NGUYEN DANG NAM

Leave a Reply

Your email address will not be published. Required fields are marked *