TROUBLESHOOTING – Wic Reset Key https://wickeys.net Mon, 03 May 2021 09:16:29 +0000 en-US hourly 1 https://wordpress.org/?v=5.7.2 Printer Service mode https://wickeys.net/printer-service-mode.html https://wickeys.net/printer-service-mode.html#respond Thu, 06 May 2021 08:00:53 +0000 https://wickeys.net/?p=84 — About Fixing Epson WF 4830, 4820 Series error code and troubleshooting, click here What is Service mode on printer? Service support mode is a service dedicated special mode that can be started by a special operation, and allows you to execute functions including adjustment, inspection, and individual operation check functions. Service Support Mode menu …

The post Printer Service mode appeared first on Wic Reset Key.

]]>
— About Fixing Epson WF 4830, 4820 Series error code and troubleshooting, click here

What is Service mode on printer?

Service support mode is a service dedicated special mode that can be started by a special operation, and allows you to execute functions including adjustment, inspection, and individual operation check functions.

Service Support Mode menu configuration

service-support-mode-top-menu-screen

Options on Maintenance SP Mode:

  1. Printer Inspection Mode:
    • is on Printer mode
    • With the ADF/SCN Unit removed, you can carry out adjustment work.
    • Usage situation:  Repair working
  2. Status Sheet Print Mode:
    • is Service status sheet print
    • In addition to checking confirming normal status sheet information, you can also check information required for servicing
    • Usage situation: Troubleshooting
    • (Contact us if you wanna the table of Service Status)
  3. User Log Get Mode:
    • is User log data get mode
    • When performing analysis, copy the user log data to external storage media such as a USB memory device connected to the main unit.
    • Usage situation: Troubleshooting
  4. CR Lock Check:
    • is CR Lock Check
    • When replacing after return, or completing repairs, you can check if the CR lock is set.
    • Usage situation:
      •  Repair working
      •  Troubleshooting

— Epson WF 4830, 4820 Series Motors and Sensors, click here

— Epson WF 4830, 4820 Series Paper Feed Mechanism, click here

Service Support Mode startup and operating procedures

Panel operation on Service Support Mode

  • 1. Press the [SW1] and [Power SW] button until the screen switches, starting the printer.

When pressing the Touch Panel, ensure that an object at least 20 mm (L) × 25 mm (W) × 2 mm (H) in size is used.
(E.g. Press with a finger diagonally)

Printer Touch Panel

  • 2. Operate the Touch Panel, and enter the ID.
    ID to enter: 83331

    • Operating procedure
      1.  Tap the Touch Panel right [RIGHT] until the value you wish to input is displayed.
      2.  Tap the Touch Panel left [LEFT] to check the value. The value will change to “*”, and await entry of the next digit.
      3.  Repeat steps 1 and steps 2 to enter the 5 digit ID.
      4.  When entry is completed, tap the Touch Panel center [CENTER] to confirm.

Service Support Mode operating procedure

NOTE:

  •  It is not possible to return to the previous digit after shifting digits. If you wish to correct the number of the previous digit, proceed with the steps until after the last step and then perform input again.
  •  Please note that the execute button is not enabled until at least two digits have been entered.

Solution if enter and execute the wrong ID

  • – When a different mode starts:
    If you enter the wrong ID and a different mode starts, there is the possibility of changing important settings of the unit, so press the power button to turn off the power immediately and then perform the process again to enter the correct ID number.
  • – When non-existent ID number:
    The following panel LCD display appears and the power is turned off automatically.

The ID use on above is maybe for Epson WF 4830, 4820 Series but the others with the Service Support Mode is the same.
Let us know you trouble, Contact us if you get problems
We also do the Reset for the printer.

— Epson XP 15000 Adjustment Program, click here

— Epson XP 15000 | XP series Troubleshooting, click here

The post Printer Service mode appeared first on Wic Reset Key.

]]>
https://wickeys.net/printer-service-mode.html/feed 0
Fix Epson WF 4830, 4820 series error code 033501, 033502, 202620, 203004,… https://wickeys.net/fix-epson-wf-4830-4820-series-error-code-033501-033502-202620-203004.html https://wickeys.net/fix-epson-wf-4830-4820-series-error-code-033501-033502-202620-203004.html#respond Wed, 05 May 2021 16:00:41 +0000 https://wickeys.net/?p=81 — About Epson WF 4830, 4820 Series Troubleshooting, click here The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — About Epson XP …

The post Fix Epson WF 4830, 4820 series error code 033501, 033502, 202620, 203004,… appeared first on Wic Reset Key.

]]>
— About Epson WF 4830, 4820 Series Troubleshooting, click here

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— About Epson XP 15000 | XP series, click here

— Epson XP 15000 AdjProg Ver1.0.0, click here

Fix Epson WF 4830, 4820 series error code 033501

Solve ILS environmental error, error code 033501

  • Error message: ILS environmental error
  • Possible cause:
    • The PIS Sensor received unexpected amount of light
  • How to fix Epson WF 4830, 4820 series error code 033501?
    1.  If the sensor is directly exposed to light, block out the light.
    2.  Replace the PIS Sensor with a new one.

Epson-WF-4830-4820-series-error-codes-1

Fix Epson WF 4830, 4820 series error code 033502

Solve ILS continuous reflected light error, error code 033502

  • Error message: ILS continuous reflected light error
  • Possible cause:
    •  The PIS Sensor received unexpected amount of reflected light from the jig I/C
    •  Anti-reflection film of the I/C has been removed
  • How to fix Epson WF 4830, 4820 series error code 033502?
    1.  Replace the jig I/C.
    2.  Replace the PIS Sensor with a new one.

Fix Epson WF 4830, 4820 series error code 033503

Solve ILS no reflected light error, error code 033503

  • Connector in use:
    • Epson WF 4830 series Main board:  CN56
    • Epson WF 4820 series Main board:  CN506
  • Error message: ILS no reflected light error
  • Possible cause:
    •  Electric voltage for the PIS Sensor is insufficient
      •  Break of the FFC
      •  The PIS Sensor has deteriorated
      •  Reflected light from the I/C is insufficient
    •  At power-on, during replacing I/C
  • How to fix Epson WF 4830, 4820 series error code 033503?
    1.  Replace the PIS Sensor FFC with a new one.
    2.  Replace the PIS Sensor with a new one.
    3.  Replace the I/C with a new one.

— Epson WF 4830, 4820 Series Motors and Sensors, click here

Fix Epson WF 4830, 4820 series error code 033504

Solve ILS shift length error, error code 033504

  • Error message: ILS shift length error
  • Possible cause:
    • Positioning of the I/C and the PIS Sensor is inaccurate.

Epson-WF-4830-4820-series-error-codes-others

Fix Epson WF 4830, 4820 series error code 033505

Solve ILS Empty Jig error, error code 033505

  • Error message: ILS Empty Jig error
  • Possible cause:
    • Light from Empty jig I/C is insufficient

Fix Epson WF 4830, 4820 series error code 033506

Solve Excessive Light error, error code 033506

  • Error message: Excessive Light error
  • Possible cause:
    • Light from Full jig I/C is too much

How to fix Epson WF 4830, 4820 series error code 033504, 033505, 033506?

  1.  Replace the jig I/C.
  2.  Replace the PIS Sensor with a new one

Fix Epson WF 4830, 4820 series error code 033507

Solve Insufficient Light error, error code 033507

  • Connector in use:
    • Epson WF 4830 series Main board:  CN56
    • Epson WF 4820 series Main board:  CN506
  • Error message: Insufficient Light error
  • Possible cause:
    • Electric voltage for the PIS Sensor is insufficient
      •  Break of the FFC
      •  The PIS Sensor has deteriorated
      •  Reflected light from the I/C is insufficient
    • At power-on, during replacing I/C, during switching APG
  • How to fix Epson WF 4830, 4820 series error code 033507?
    1.  Replace the I/C with a new one.
    2.  Replace the PIS Sensor with a new one.

Epson-WF-4830-4820-series-pump-mechanism

— Fix Epson WF 4830, 4820 Series I/S PID error codes, click here

Fix Epson WF 4830, 4820 series error code 034001

Solve Insufficient Light error, error code 034001

  • Error message:  Home position error

*Paper jam error will be displayed but the error history is saved.

  • Possible cause:
    •  The carriage does not move
      1.  Overload of the carriage drive mechanism (paper jam, foreign object)
      2.  Failure of the ink system
      3.  Failure of the CR motor
      4.  Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 034001?
    1.  Check that no obstacle exist in the CR motion range.
    2.  Manually unlock the carriage. (If unlocking is impossible, the problem caused by failure of the ink system.)
    3.  Check the load applied to the CR by moving it by hand.
    4.  Turn the printer on and check if the carriage moves. If it still does not move, the motor is broken or failure of the Main Board.

Fix Epson WF 4830, 4820 series error code 034500

Solve Insufficient Light error, error code 034500

  • Error message: Ink cartridge replacement timing contact detection error
  • Possible cause:
    • Because the I/C is not securely installed, it comes in contact with the housing.
  • How to fix Epson WF 4830, 4820 series error code 034500?
    • Install the I/C securely.

— Fix Epson WF 4830, 4820 Series error code 000080, 000084, 000093,… click here

Fix Epson WF 4830, 4820 series error code 060002

Solve Driver mismatch error, error code 060002

  • Error message: Driver mismatch error
  • Possible cause:
    •  Non -supported printer driver
    •  Mismatch between custom printer driver and custom printer
  • How to fix Epson WF 4830, 4820 series error code 060002?
    • Check the OS and the version of the printer driver.

EPSON WF 4830, 4820 Series System Error code fix

Epson-WF-4830-4820-series-system-error

Fix Epson WF 4830, 4820 series error code 202620

Solve Wi-Fi Board failure, error code 202620

  • Error message: Wi-Fi Board failure
  • Possible cause:
    •  Failure or disconnection of the wireless network board
  • How to fix Epson WF 4830, 4820 series error code 202620?
    •  Check the Wi-Fi Board.
    •  Check the FFC.

Fix Epson WF 4830, 4820 series error code 202623

Solve Failure or disconnection of the NFC board, error code 202623

  • Error message: Failure or disconnection of the NFC board
  • Possible cause:
    • Failure or disconnection of the NFC board
  • How to fix Epson WF 4830, 4820 series error code 202623?
    • Check the NFC board.

Fix Epson WF 4830, 4820 series error code 203004

Solve Panel Unit Failure, error code 203004

  • Error message: Panel Unit Failure
  • Possible cause:
    • Failure or disconnection of the Panel Unit
  • How to fix Epson WF 4830, 4820 series error code 203004?
    1.  Check the Panel Unit.
    2.  Check the FFC.

Fix Epson WF 4830, 4820 series error code 205102

Solve Card Board failure, error code 205102

  • Error message: Card Board failure
  • Possible cause:
    •  Failure or disconnection of the Card Board
  • How to fix Epson WF 4830, 4820 series error code 205102?
    1.  Check the Card board.
    2.  Check the FFC.

Fix Epson WF 4830, 4820 series error code 3xxxxx

Solve Firmware bug, error code 3xxxxx

  • Error message: Firmware bug
  • Possible cause:
    • An error code will be assigned to each firmware internal error as necessary
  • How to fix Epson WF 4830, 4820 series error code 3xxxxx?
    1.  Check the Firmware version
    2. Check the Main Board.

— Epson WF 4830, 4820 Series Paper feed mechanism, click here

The post Fix Epson WF 4830, 4820 series error code 033501, 033502, 202620, 203004,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-series-error-code-033501-033502-202620-203004.html/feed 0
Fix Epson WF 4830, 4820 series on heating when printing https://wickeys.net/fix-epson-wf-4830-4820-series-on-heating-when-printing.html https://wickeys.net/fix-epson-wf-4830-4820-series-on-heating-when-printing.html#respond Wed, 05 May 2021 12:00:04 +0000 https://wickeys.net/?p=77 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. Fix Epson WF 4830, 4820 series error code 031001, 031002 Connector in use: Epson …

The post Fix Epson WF 4830, 4820 series on heating when printing appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

Fix Epson WF 4830, 4820 series error code 031001, 031002

  • Connector in use:
    • Epson WF 4830 series Main board:  CN66, CN67
    • Epson WF 4820 series Main board:  CN606

Solve HeadHot detect error (pre printing), error code 031001

  • Error message: HeadHot detect error (pre printing)
  • Possible cause:
    •  Disconnection, break, skew or damage of the Head FFC
    •  Overheat of the Printhead
      1.  Failure of the Printhead
      2.  Failure of the Main Board
    •  Occurs in-between print passes (after printing one pass and before printing the next pass)

Solve HeadHot detect error (after flushing), error code 031002

  • Error message: HeadHot detect error (after flushing)
  • Possible cause:
    •  Disconnection, break, skew or damage of the Head FFC
    •  Overheat of the Printhead
      1.  Failure of the Printhead
      2.  Failure of the Main Board
    •  Occurs every after ink flushing operation
      (Flushing before starting printing, flushing after manual cleaning and etc.)

— Epson WF 4830, 4820 Series Motors and Sensors, click here

How to fix Epson WF 4830, 4820 series error code 031001, 031002?

    1.  Check the Head FFC for disconnection, break, skew or damage.
    2.  Replace the Printhead with a new one.
    3.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-error-codes.

— Fix Epson WF-4830/4820 Series error code 100001, 100005, 100010,… click here

Fix Epson WF 4830, 4820 series error code 031003

Solve Transistor temperature error, error code 031003

  • Error message: Transistor temperature error
  • Possible cause:
    •  Failure of the Main Board
      •  Occurs after receiving a print job and starting printing
  • How to fix Epson WF 4830, 4820 series error code 031003?
    • Replace the Main Board with a new one

Fix Epson WF 4830, 4820 series error code 031004

Solve Head temperature error, error code 031004

  • Connector in use:
    • Epson WF 4830 series Main board:  CN66, CN67
    • Epson WF 4820 series Main board:  CN606
  • Error message: Head temperature error
  • Possible cause:
    •  Disconnection, break, skew or damage of the Head FFC
    •  Occurs after receiving a print job and starting printing
      Failure of the thermistor inside the Printhead
      Temperature around the Printhead is out of the range from -20 to 80 degrees C.
  • How to fix Epson WF 4830, 4820 series error code 031004?
    1.  Check the Head FFC for disconnection, break, skew or damage.
    2.  Replace the Printhead with a new one.
    3.  Replace the Main Board with a new one

Fix Epson WF 4830, 4820 series error code 031006

Solve Blowout of a fuse error (Head), error code 031006

  • Connector in use:
    • Epson WF 4830 series Main board:  CN66, CN67
    • Epson WF 4820 series Main board:  CN606
  • Error message: Blowout of a fuse error (Head)
  • Possible cause:
    •  Failure of the power source for the Printhead
      1. ## Failure of the circuit
        Disconnection, break, skew, or damage of the Head FFC
      2. ## Blowout of fuse on the Main Board
        Failure of the Printhead
    •  Occurs at power-on, when replacing the ink cartridge, in between print passes, and after flushing operation
  • How to fix Epson WF 4830, 4820 series error code 031006?
    • ## If the fuse has not blown out
      1. Check the Head FFC for disconnection, break, skew or damage.
    • ## If the fuse has blown out
      1. Replace the Main Board with a new one.
    • ## In the other cases
      1. Replace the Printhead with a new one.

Epson-WF-4830-4820-series-ASF-error-codes-00006x-7x

Fix Epson WF 4830, 4820 series error code 031008

Solve VBS overvoltage error, error code 031008

  • Connector in use:
    • Epson WF 4830 series Main board:  CN66, CN67
    • Epson WF 4820 series Main board:  CN606
  • Error message: VBS overvoltage error
  • Possible cause:
    1.  Head FFC failure (skew, foreign object attached)
    2.  Failure of the Printhead
    3.  Failure of the Main Board (Occurrence frequency based on past record is 1. > 2. > 3.)
  • How to fix Epson WF 4830, 4820 series error code 031008?
    1.  Check the Head FFC.
    2.  Replace the Printhead with a new one.
    3.  Replace the Main Board with a new one

— Epson WF 4830, 4820 Series Paper feed mechanism, click here

Fix Epson WF 4830, 4820 series error code 033001

Solve Blowout of a fuse error (CRCM), error code 033001

  • Connector in use:
    • Epson WF 4830 series Main board:  CN68
    • Epson WF 4820 series Main board:  CN608
  • Error message: Blowout of a fuse error (CRCM)
  • Possible cause:
    •  Failure of the Main Board
    •  Occurs at power-on, and during operation for replacing the ink cartridge
  • How to fix Epson WF 4830, 4820 series error code 033001?
    1.  Check the CRCM FFC for disconnection, break, skew or damage.
    2.  If the error still occurs after the restart, replace the Main Board.

Epson-WF-4830-4820-series-error-codes-1

Fix Epson WF 4830, 4820 series error code 033003, 033004, 033005

  • Error message: Ink device error
  • Possible cause:
    •  Error in the printer settings
    •  Failure of the Main Board
      •  Occurs at power-on
  • How to fix Epson WF 4830, 4820 series error code 033003, 033004, 033005?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830, 4820 series error code 033006, 033007

Solve CRCM access error (Hard factor), error code 033006, 033007

  • Connector in use:
    • Epson WF 4830 series Main board:  CN68
    • Epson WF 4820 series Main board:  CN608
  • Error message: Blowout of a fuse error (CRCM)
  • Possible cause:
    •  Disconnection, break, skew or damage of the CRCM FFC
    •  Failure of the CSIC terminal/CR contact module
    •  Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 033001?
    1.  Check the CRCM FFC for disconnection, break, skew or damage.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830, 4820 series error code 033010

Solve CSIC access error (Hard factor), error code 033010

  • Connector in use:
    • Epson WF 4830 series Main board:  CN68
    • Epson WF 4820 series Main board:  CN608
  • Error message: CSIC access error (Hard factor)
  • Possible cause:
    •  Disconnection, break, skew or damage of the CRCM FFC
    •  Failure of the CSIC terminal/CR contact module
    •  Failure of the Main Board (mismatch of the printer settings that cannot be changed when repairing the printer)
      •  Occurs at power-on
  • How to fix Epson WF 4830, 4820 series error code 033010?
    1.  Check the CRCM FFC for disconnection, break, skew or damage.
    2.  If the error still occurs after the restart, replace the Main Board.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF 4830, 4820 series on heating when printing appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-series-on-heating-when-printing.html/feed 0
Fix Epson WF 4830, 4820 series I/S PID error codes https://wickeys.net/fix-epson-wf-4830-4820-series-i-s-pid-error-codes.html https://wickeys.net/fix-epson-wf-4830-4820-series-i-s-pid-error-codes.html#respond Wed, 05 May 2021 08:00:35 +0000 https://wickeys.net/?p=74 — Fix Epson XP 15000 | XP series error codes list, click here This section describes how to check the fatal error code, description, and the possible causes. The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer …

The post Fix Epson WF 4830, 4820 series I/S PID error codes appeared first on Wic Reset Key.

]]>
— Fix Epson XP 15000 | XP series error codes list, click here

This section describes how to check the fatal error code, description, and the possible causes.

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

Fix Epson WF 4830/4820 series error code 000100, 000110

Solve IS PID driving time error, error code 000100

Solve IS load position driving time error, error code 000110

  • Possible cause:
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 000100, 000110?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830/4820 series error code 000101, 000111

Solve IS PID excess load error, error code 000101

Solve IS load position excess load error , error code 000111

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  The IS Motor stopped running in the middle of the operation
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Failure of the IS Motor (not completely broken)
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000101, 000111?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for disengage or crack.
    3.  Clean the IS Scale if it is contaminated.
    4.  Replace the Ink System Unit with a new one.
    5.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-I-S-printer-error-codes

— Epson WF 4830, 4820 Series Paper feed mechanism, click here

— Fix Epson WF-4830/4820 Series error code 100001, 100005, 100010,… click here

Fix Epson WF 4830/4820 series error code 000102, 000112

Solve IS PID excess speed error, error code 000102

Solve IS load position excess speed error , error code 000112

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  Failed to read the IS Encoder
      • 1. Contamination of the IS Scale
      • 2. Damage or skew of the IS Encoder FFC
      • 3. Failure of the IS Encoder
    •  Failure of the IS Motor Driver
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000102, 000112?
    1.  Clean the IS Scale if it is contaminated.
    2.  Check the IS Encoder FFC or the connector.
    3.  Replace the Ink System Unit with a new one.
    4.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 000103, 000113

Solve IS PID reverse error, error code 000103

Solve IS load position reverse error , error code 000113

— Solving Epson WF 4830/4820 Series error codes, click here

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Possible cause:
    •  Operation failure of the IS Motor, stopped by obstacles
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Damage or skew of the IS Motor cable/Encoder FFC
      • 4. Failure of the IS Encoder
      • 5. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000103, 000113?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for tooth breakage or disengaging.
    3.  Clean the IS Scale if it is contaminated.
    4.  Check the cable/FFC of the IS Motor/Encoder.
    5.  Replace the Ink System Unit with a new one.
    6.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-IS-PID-error-code

Fix Epson WF 4830/4820 series error code 000104

Solve IS PID lock error, error code 000104

  • Connector in use: 
    • Main board on Epson WF 4830 series: CN75, CN50
    • Main board on Epson WF 4820 series: CN508, CN701
  • Error message: I/S PID lock error
  • Possible cause:
    •  The IS Motor did not run
      • 1. The Ink System Unit was stopped by;
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the IS Encoder
      • 2. Contamination of the IS Scale
      • 3. Break, skew or damage of the IS Motor cable/Encoder FFC
      • 4. Failure of the IS Encoder
      • 5. Failure of the IS Motor (the lead wire is broken or the connector is disconnected)
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000104?
    1.  Check the load applied to the IS Motor by moving it by hand.
    2.  Check the wheel train of the Ink System Unit drive for tooth breakage or disengaging.
    3.  Clean the IS Scale if it is contaminated.
    4.  Check the cable/FFC of the IS Motor/Encoder.
    5.  Replace the Ink System Unit with a new one.
    6.  Replace the Main Board with a new one

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF 4830, 4820 series I/S PID error codes appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-series-i-s-pid-error-codes.html/feed 0
Fix Epson WF 4830 series error code 000080, 000084, 000093,… https://wickeys.net/fix-epson-wf-4830-series-error-code-000080-000084-000093.html https://wickeys.net/fix-epson-wf-4830-series-error-code-000080-000084-000093.html#respond Tue, 04 May 2021 16:00:48 +0000 https://wickeys.net/?p=71 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — Epson XP 15000 | XP series Adjustment Program, click here Fix Epson WF …

The post Fix Epson WF 4830 series error code 000080, 000084, 000093,… appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

Fix Epson WF 4830 series (only) error code 000080, 000090

Solve 2nd ASF PID driving time error, error code 000080

Solve 2nd ASF load position driving time error, error code 000090

  • Possible cause: 
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830 series error code 000080, 000090?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Epson-WF-4830-4820-series-pump-mechanism

Fix Epson WF 4830 series (only) error code 000081, 000091

  • Connector in use: Main Board (CN76, CN47) only on Epson WF 4830 series printer
  • Possible cause: 
    •  The ASF Motor stopped running in the middle of the operation
      • 1. The 2nd ASF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the ASF Encoder
      • 2. Disconnection or contamination of the ASF Scale
      • 3. Disconnection, break, skew or damage of the ASF Motor cable/Encoder FFC
      • 4. Failure of the ASF Encoder
      • 5. Failure of the ASF Motor (not completely broken)
      • 6. Failure of the Main Board

Solve 2nd ASF PID excess load error, error code 000081

  • How to fix Epson WF 4830 series error code 000081?
    1.  Check that no obstacle exist in the 2nd ASF motion range.
    2.  Check the load of the 2nd ASF paper feed mechanism.
    3.  Check the 2nd ASF Drive Wheel Train.
    4.  Check the ASF Scale for damage or contamination.
    5.  Check the ASF Encoder FFC or the connector.
    6.  Replace the ASF Motor with a new one.
    7.  Replace the Main Board with a new one.

Solve 2nd ASF load position excess load error, error code 000091

  • How to fix Epson WF 4830 series error code 000091?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the 2nd ASF paper feed mechanism.
    3.  Check the 2nd ASF Drive Wheel Train.
    4.  Clean the ASF Scale if it is contaminated.
    5.  Replace the ASF Motor with a new one.
    6.  Replace the Main Board with a new one.

Epson-WF-4830-series-ASF-error-codes-00008x-00009x

— Fix Epson WF 4830, 4820 series error code 000060, 000064, 000071,… click here

Fix Epson WF 4830 series (only) error code 000082, 000092

  • Connector in use: Main Board (CN76, CN47) only on Epson WF 4830 series printer

Solve 2nd ASF PID excess speed error , error code 000082

Solve 2nd ASF load position excess speed error, error code 000092

  • Possible cause: 
    •  Failed to read the ASF Encoder
      • 1. Contamination of the ASF Scale
      • 2. Damage or skew of the ASF Motor cable or Encoder FFC
      • 3. Failure of the ASF Encoder
    •  Failure of the ASF Motor driver
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830 series error code 000082, 000092?
    1.  Clean the ASF Scale if it is contaminated.
    2.  Check the ASF Encoder FFC or the connector.
    3.  Replace the ASF Encoder with a new one.
    4.  Replace the Main Board with a new one.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830 series (only) error code 000083, 000093

  • Connector in use: Main Board (CN76, CN47) only on Epson WF 4830 series printer

Solve 2nd ASF PID reverse error , error code 000083

Solve 2nd ASF load position reverse error, error code 000093

  • Possible cause: 
    •  Paper feed fails, stopped by obstacles
      • 1. The 2nd ASF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the ASF Encoder
      1.  Contamination of the ASF Scale
      2.  Damage or skew of the ASF Motor cable or Encoder FFC
      3.  Failure of the ASF Encoder
      4.  Failure of the Main Board
  • How to fix Epson WF 4830 series error code 000083, 000093?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the 2nd ASF paper feed mechanism.
    3.  Check the 2nd ASF Drive Wheel Train.
    4.  Clean the ASF Scale if it is contaminated.
    5.  Check the ASF Encoder FFC or the connector.
    6.  Replace the ASF Encoder with a new one.
    7.  Replace the Main Board with a new one

Epson-WF-4830-4820-series-wiper-driver-mechanism

— More about fixing Epson WF 4830, 4820 series error code 000040, 000044, 000051,… click here

Fix Epson WF 4830 series (only) error code 000084

Solve 2nd ASF PID lock error, error code 000084

  • Connector in use: Main Board (CN76, CN47) only on Epson WF 4830 series printer
  • Possible cause: 
    •  The ASF Motor did not run
      • 1. The 2nd ASF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the ASF Encoder
      • 2. Contamination of the ASF Scale
      • 3. Disconnection, break, skew or damage of the ASF Motor cable/Encoder FFC
      • 4. Failure of the ASF Encoder
      • 5. Failure of the ASF Motor (the lead wire is broken or the connector is disconnected)
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830 series error code 000084?
    1.  Check that no jammed paper exist in the paper path.
    2.  Check the load of the 2nd ASF.
    3.  Check the 2nd ASF Drive Wheel Train.
    4.  Clean the ASF Scale if it is contaminated.
    5.  Check the ASF Encoder FFC or the connector.
    6.  Replace the ASF Encoder with a new one.
    7.  Check the connector of the ASF Motor.
    8.  Replace the ASF Motor with a new one.
    9.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF 4830 series error code 000080, 000084, 000093,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-series-error-code-000080-000084-000093.html/feed 0
Fix Epson WF-4830/4820 error code 000060, 000064, 000071,… https://wickeys.net/fix-epson-wf-4830-4820-error-code-000060-000064-000071.html https://wickeys.net/fix-epson-wf-4830-4820-error-code-000060-000064-000071.html#respond Tue, 04 May 2021 12:00:19 +0000 https://wickeys.net/?p=67 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — Epson XP 15000 | XP series Adjustment Program, click here Fix Epson WF …

The post Fix Epson WF-4830/4820 error code 000060, 000064, 000071,… appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

Fix Epson WF 4830/4820 series error code 000060, 000070

Solving ASF PID driving time error, error code 000060

Solving ASF load position driving time error, error code 000070

  • Possible cause: 
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 000060, 000070?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Epson-WF-4830-4820-series-pump-mechanism

Fix Epson WF 4830/4820 series error code 000061, 000071

  • Connector in use:
    • Epson WF 4830 Series:  CN80,  CN55
    • Epson WF 4820 Series:  CN103, CN104
  • Possible cause: 
    •  The ASF Motor stopped running in the middle of the operation
      • 1. The ASF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the ASF Encoder
      • 2. Contamination of the ASF Scale
      • 3. Failure of the ASF Encoder
      • 4. Failure of the ASF Motor (not completely broken)
      • 5. Failure of the Main Board

Epson-WF-4830-4820-series-ASF-error-codes-00006x-7x

— More about fixing Epson WF 4830, 4820 series error code 000040, 000044, 000051,… click here

Solving ASF PID excess load error, error code 000061

  • How to fix Epson WF 4830, 4820 series error code 000061?
    1.  Check that no obstacle exist in the ASF motion range.
    2.  Check the ASF Drive Wheel Train.
    3.  Check the ADF Scale for disconnection or contamination. Clean the ADF Scale if it is contaminated.
    4.  Check the cable/FFC of the ASF Motor/Encoder.
    5.  Replace the ASF Encoder with a new one.
    6.  Replace the ASF Motor with a new one.
    7.  Replace the Main Board with a new one.

Solving ASF load position excess load error, error code 000071

  • How to fix Epson WF 4830, 4820 series error code 000071?
    1.  Check that no obstacle exist in the ASF motion range.
    2.  Check the load of the ASF paper feed mechanism.
    3.  Clean the ASF Scale if it is contaminated.
    4.  Replace the ASF Encoder with a new one.
    5.  Replace the ASF Motor with a new one.
    6.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 000062, 000072

  • Connector in use:
    • Epson WF 4830 Series:  CN80,  CN55
    • Epson WF 4820 Series:  CN103, CN104
  • Possible cause: 
    •  Failed to read the ASF Encoder
      • 1. Contamination of the ASF Scale
      • 2. Damage or skew of the ASF Motor cable/Encoder FFC
      • 3. Failure of the ASF Encoder
    •  Failure of the ASF Motor Driver
      • 4. Failure of the Main Board

Solving  ASF PID excess speed error, error code 000062

Solving ASF load position excess speed error, error code 000072

  • How to fix Epson WF 4830, 4820 series error code 000062, 000072?
    1.  Clean the ASF Scale if it is contaminated.
    2.  Check the cable/FFC of the ASF Motor/Encoder.
    3.  Replace the ASF Encoder with a new one.
    4.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 000063, 000073

  • Connector in use:
    • Epson WF 4830 Series:  CN80,  CN55
    • Epson WF 4820 Series:  CN103, CN104
  • Possible cause: 
    •  Paper feed fails, stopped by obstacles
      • 1. The ASF was stopped by;
        • Obstacles such as jammed paper
        • Overload of the mechanism
        • Disengaging or breakage of the gears
    •  Failed to read the ASF Encoder
      • 2. Contamination of the ASF Scale
      • 3. Damage or skew of the ASF Motor cable/Encoder FFC
      • 4. Failure of the ASF Encoder
      • 5. Failure of the Main Board

Epson-WF-4830-4820-series-ASF-error-codes

Solving ASF PID reverse error, error code 000063

  • How to fix Epson WF 4830, 4820 series error code 000063?
    1.  Check that no obstacle exist in the ASF motion range.
    2.  Check the ASF Drive Wheel Train.
    3.  Clean the ASF Scale if it is contaminated.
    4.  Check the cable/FFC of the ASF Motor/Encoder.
    5.  Replace the ASF Encoder with a new one.
    6.  Replace the Main Board with a new one.

Solving ASF load position reverse error, error code 000073

  • How to fix Epson WF 4830, 4820 series error code 000073?
    1.  Check that no obstacle exist in the ASF motion range.
    2.  Check the load of the ASF paper feed mechanism.
    3.  Check the ASF Drive Wheel Train.
    4.  Clean the ASF Scale if it is contaminated.
    5.  Check the cable/FFC of the ASF Motor/Encoder.
    6.  Replace the ASF Encoder with a new one.
    7.  Replace the Main Board with a new one.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830/4820 series error code 000063, 000073

  • Connector in use:
    • Epson WF 4830 Series:  CN80,  CN55
    • Epson WF 4820 Series:  CN103, CN104

Solving ASF PID lock error, error code 000064

  • Possible cause: 
    • The ASF Motor did not run
      • 1. The ASF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Disengaging or breakage of the gears
    • Failed to read the ASF Encoder
      • 2. Contamination of the ASF Scale
      • 3. Disconnection, break, skew or damage of the ASF Motor cable/Encoder FFC
      • 4. Failure of the ASF Encoder
      • 5. Failure of the ASF Motor (the lead wire is broken or the connector is disconnected)
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000064?
    1.  Check that no obstacle exist in the ASF motion range.
    2.  Check the ASF Drive Wheel Train.
    3.  Clean the ASF Scale if it is contaminated.
    4.  Check the cable/FFC of the ASF Motor/Encoder.
    5.  Replace the ASF Encoder with a new one.
    6.  Replace the ASF Motor with a new one.
    7.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF-4830/4820 error code 000060, 000064, 000071,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-error-code-000060-000064-000071.html/feed 0
Fix Epson WF-4830/4820 error code 000040, 000044, 000051,… https://wickeys.net/fix-epson-wf-4830-4820-error-code-000040-000044-000051.html https://wickeys.net/fix-epson-wf-4830-4820-error-code-000040-000044-000051.html#respond Tue, 04 May 2021 08:00:12 +0000 https://wickeys.net/?p=64 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — Epson XP 15000 | XP series Adjustment Program, click here Fix Epson WF …

The post Fix Epson WF-4830/4820 error code 000040, 000044, 000051,… appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

Fix Epson WF 4830/4820 series error code 000040, 000050

Solving PF PID driving time error code 000040

Solving PF load position driving time error code 000050

  • Possible cause: 
    • Malfunction or crash of the firmware
      • The PE sensor remains in paper detection status and a paper jam error occurs instead of causing a fatal error
  • How to fix Epson WF 4830, 4820 series error code 000040, 000050?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830/4820 series error code 000041, 000051

  • Connector in use:
    • Epson WF 4830 series: CN73, CN52
    • Epson WF 4820 series:  CN703, CN502
  • Possible cause: 
    •  The PF Motor stopped running in the middle of the operation
      • 1. The PF was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the paper feed mechanism
        •  Disengaging or breakage of the gears
    •  Failed to read the PF Encoder
      • 2. Contamination of the PF Scale
      • 3. Disconnection, break, skew or damage of the PF Motor cable/Encoder FFC
      • 4. Failure of the PF Motor (not completely broken)
      • 5. Failure of the Main Board

— Fix Epson WF 4830, 4820 series error code 100065, 100066, 100074,… click here

— Fix Epson WF 4830/4820 series error code 100001, 100005, 100010, click here

Solving PF PID driving time error code 000041

  • How to fix Epson WF 4830, 4820 series error code 000041?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the paper feed mechanism.
    3.  Check the wheel train of the PF drive and the Timing Belt for damaging or looseness.
    4.  Check the PF Scale for damage or contamination.
    5.  Check the PF Encoder FFC or the connector.
    6.  Replace the PF Motor with a new one.
    7.  Replace the Main Board with a new one.

Solving PF load position driving time error code 000051

  • How to fix Epson WF 4830, 4820 series error code 000051?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the paper feed mechanism.
    3.  Check the wheel train of the PF drive and the Timing Belt for damaging or looseness.
    4.  Clean the PF Scale if it is contaminated.
    5.  Replace the PF Motor with a new one
    6.  Replace the Main Board with a new one

Epson-WF-4830-4820-series-error-code-printer-PF

Fix Epson WF 4830/4820 series error code 000042, 000052

Solving PF PID excess speed error code 000042

Solving PF load position excess speed error code 000052

  • Connector in use:
    • Epson WF 4830 series: CN73, CN52
    • Epson WF 4820 series:  CN703, CN502
  • Possible cause: 
    •  Failed to read the PF Encoder
      • 1. Contamination of the PF Scale
      • 2. Skew or damage of the PF encoder FFC
      • 3. Failure of the PF encoder sensor
    •  Failure of the PF Motor driver
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000042, 000052?
    1.  Clean the PF Scale if it is contaminated.
    2.  Check the PF encoder FFC or the connector.
    3.  Replace the PF encoder sensor with a new one.
    4.  Replace the Main Board with a new one.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830/4820 series error code 000043, 000053

  • Connector in use:
    • Epson WF 4830 series: CN73, CN52
    • Epson WF 4820 series:  CN703, CN502
  • Possible cause: 
    •  Paper feed fails, stopped by obstacles
      • 1. Paper feed was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the paper feed mechanism
        •  Disengaging or tooth breakage of wheel train of the paper feed mechanism
    •  Failed to read the PF Encoder
      • 2. fraying of the PF Timing Belt
      • 3. Contamination of the PF Scale
      • 4. Skew or damage of the PF encoder FFC
      • 5. Failure of the PF encoder sensor
      • 6. Failure of the Main Board

Solving PF PID reverse error code 000043

  • How to fix Epson WF 4830, 4820 series error code 000043?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the paper feed mechanism.
    3.  Check the wheel train of the PF drive and the PF Timing Belt.
    4.  Clean the PF Scale if it is contaminated.
    5.  Check the PF Encoder FFC or the connector.
    6.  Replace the PF Encoder with a new one.
    7.  Replace the Main Board with a new one.

Solving PF load position reverse error code 000053

  • How to fix Epson WF 4830, 4820 series error code 000053?
    1.  Check that no pieces of paper or foreign objects exist in the paper path.
    2.  Check the load of the paper feed mechanism.
    3.  Check the wheel train of the PF drive and the Timing Belt for damaging or looseness.
    4.  Clean the PF Scale if it is contaminated.
    5.  Check the PF encoder FFC or the connector.
    6.  Replace the PF encoder sensor with a new one.
    7.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-error-code-00004x

Fix Epson WF 4830/4820 series error code 000044

Solving PF PID lock error code 000044

  • Possible cause: 
    •  The PF Motor did not run or obstacles exist in the paper path
      • 1. Overload of the paper feed mechanism
      • 2. The PF Timing Belt become frayed, jumping, or the wheel train of paper feed mechanism is disengaged or its tooth is broken
    •  Failed to read the PF Encoder
      • 3. Contamination of the PF Scale
      • 4. Disconnection, break, skew or damage of the PF Encoder FFC
      • 5. Failure of the PF Sensor
      • 6. Failure of the PF Motor (the lead wire is broken or the connector is disconnected)
      • 7. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 000044?
    1.  Check that no jammed paper exist in the paper path.
    2.  Check the load of the PF.
    3.  Check the wheel train of the PF drive and the Timing Belt for damaging or looseness.
    4.  Clean the PF Scale if it is contaminated.
    5.  Check the PF Encoder FFC or the connector.
    6.  Replace the PF Sensor with a new one.
    7.  Check the connector of the PF Motor.
    8.  Replace the PF Motor with a new one
    9.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF-4830/4820 error code 000040, 000044, 000051,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-error-code-000040-000044-000051.html/feed 0
Fix Epson WF-4830/4820 error code 000020, 000025, 000032,… https://wickeys.net/fix-epson-wf-4830-4820-error-code-000020-000025-000032.html https://wickeys.net/fix-epson-wf-4830-4820-error-code-000020-000025-000032.html#respond Mon, 03 May 2021 16:00:16 +0000 https://wickeys.net/?p=61 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — Epson XP 15000 | XP series Adjustment Program, click here Fix Epson WF …

The post Fix Epson WF-4830/4820 error code 000020, 000025, 000032,… appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

Fix Epson WF 4830/4820 series error code 000020, 000030

Solved CR PID driving time error, error code 000020

Solved CR load position driving time error, error code 000030

  • Possible cause: 
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 100065?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

Fix Epson WF 4830/4820 series error code 000021, 000031

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID excess load error, error code 000021

  • Possible cause: 
    •  The CR Motor stopped running in the middle of the operation
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
        •  Disengaging, fraying, jumping of the Timing Belt
        •  Crack or disengaging of the gear, or the APG lever interferes with the CR
    •  Failed to read the CR Encoder
      • 2. Contamination of the CR Scale
      • 3. Failure of the CR Motor (not completely broken)
      • 4. Failure of the Main Board

Solved CR load position excess load error, error code 000031

  • Possible cause: 
    •  The CR Motor stopped running in the middle of the operation
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
        •  Disengaging or breakage of the gears
        •  Disengaging, fraying, jumping of the Timing Belt
    •  Failed to read the CR Encoder
      • 2. Contamination of the CR Scale
      • 3. Failure of the CR Motor (not completely broken)
      • 4. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000021, 000031?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Check the load applied to the CR by moving it by hand.
    5.  Check if the lubricant on the CR Guide Shaft is adequate.
    6.  Check the CR drive mechanism.
    7.  Clean the CR Scale if it is contaminated.
    8.  Replace the CR Motor with a new one.
    9.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-error-code-on-printer-CR

Fix Epson WF 4830/4820 series error code 000022, 000032

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID excess speed error, error code 000022

Solved CR load position excess load error, error code 000032

  • Possible cause: 
    •  Failed to read the CR Encoder
      • 1. Contamination of the CR Scale
      • 2. Damage or skew of the CR Encoder FFC
      • 3. Failure of the CR Encoder
    •  Failure of the CR Motor Driver
      • 4. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000022, 000032?

    1.  Clean the CR Scale if it is contaminated.
    2.  Check the FFC of the CR Encoder.
    3.  Replace the CR Encoder with a new one.
    4.  Replace the Main Board with a new one.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830/4820 series error code 000023, 000033

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID reverse error, error code 000023

  • Possible cause: 
    •  Operation failure of the CR Motor, stopped by obstacles
      • 1. CR was stopped by;
        • Obstacles such as jammed paper
        • Interfere with the Ink System Unit
        • Disengaging or breakage of the gears
    •  Failed to read the CR Encoder
      • 2. Jumping of the CR Timing Belt
      • 3. Contamination of the CR Scale
      • 4. Damage or skew of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the Main Board

Solved CR load position reverse error, error code 000033

  • Possible cause: 
    •  Operation failure of the CR Motor, stopped by obstacles
      • 1. CR was stopped by;
        • Obstacles such as jammed paper
        • Overload of the mechanism
        • Interfere with the Ink System Unit
    •  Failed to read the CR Encoder
      • 2. Jumping of the CR Timing Belt
      • 3. Contamination of the CR Scale
      • 4. Damage or skew of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000023, 000033?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the CR Encoder FFC or the connector.
    6.  Replace the CR Encoder with a new one.
    7.  Replace the Main Board with a new one.

— Fix Epson WF 4830, 4820 series error code 100065, 100066, 100074,… click here

Epson-WF-4830-4820-series-wiper-driver-mechanism

Fix Epson WF 4830/4820 series error code 000024

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID lock error, error code 000024

  • Error message: CR PID lock error
  • Possible cause: 
    • The CR Motor did not run, or the CR could not move smoothly
      • 1. Overload of the CR
    • Failed to read the CR Encoder
      • 2. The Timing Belt become frayed or jumping
      • 3. Contamination of the CR Scale
      • 4. Disconnection, break, skew or damage of the CR Encoder FFC
      • 5. Failure of the CR Encoder
      • 6. Failure of the CR Motor (the lead wire is broken or the connector is disconnected)
      • 7. Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000024?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Move the CR by hand to see if it moves smoothly without getting stuck.
    3.  Check the Timing Belt for fraying or looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the connector and the CR Encoder FFC for damage.
    6.  Replace the CR Encoder FFC with a new one.
    7.  Check the connector of the CR Motor.
    8.  Replace the CR Motor with a new one.
    9.  Replace the Main Board with a new one

Fix Epson WF 4830/4820 series error code 000025

  • Connector in use:
    • Epson WF 4830 series:  CN72, CN68
    • Epson WF 4820 series: CN702, CN608

Solved CR PID speed fall error, error code 000024

  • Error message: CR PID speed fall error
  • Possible cause: 
    •  Operation failure of the CR
      • 1. The CR was stopped by;
        •  Obstacles such as jammed paper
        •  Overload of the mechanism
        •  Interfere with the Ink System Unit
    •  Failed to read the CR Encoder
      •  The Timing Belt become loosened or jumping
      •  Contamination of the CR Scale
      •  Damage or skew of the CR Encoder FFC
      •  Failure of the CR Motor
      •  Failure of the Main Board

How to fix Epson WF 4830, 4820 series error code 000025?

    1.  Check that no obstacle exist in the CR motion range.
    2.  Check the CR lock and Ink System Unit for any abnormality.
    3.  Check the Timing Belt for looseness.
    4.  Clean the CR Scale if it is contaminated.
    5.  Check the connector of the CR Encoder FFC.
    6.  Replace the CR Motor with a new one.
    7.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF-4830/4820 error code 000020, 000025, 000032,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-error-code-000020-000025-000032.html/feed 0
Fix Epson WF-4830/4820 error code 100065, 100066, 100074,… https://wickeys.net/fix-epson-wf-4830-4820-error-code-100065-100066-100074.html https://wickeys.net/fix-epson-wf-4830-4820-error-code-100065-100066-100074.html#respond Mon, 03 May 2021 12:00:27 +0000 https://wickeys.net/?p=56 The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — Epson XP 15000 | XP series Adjustment Program, click here Connector in use: …

The post Fix Epson WF-4830/4820 error code 100065, 100066, 100074,… appeared first on Wic Reset Key.

]]>
The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

  • Connector in use:
    • Epson WF 4830 series:  CN606, CN601
    • Epson WF 4820 series:  CN801, CN804

Fix Epson WF 4830/4820 series error code 100065

Solved FB PID excess speed error

  • Error message: FB PID excess speed error
  • Possible cause: 
    • Failed to read the Scanner Encoder
      • 1. Contamination of the Scanner Scale
      • 2. Damage or skew of the Scanner FFC
      • 3. Failure of the Scanner Encoder
    • Failure of the Scanner Motor Driver
      • 4. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100065?
    1.  Check the Scanner FFC for damage, disconnection or skew.
    2.  Replace the SCN Unit with a new one.
    3.  Replace the Main Board with a new one

Fix Epson WF 4830/4820 series error code 100066

Solved FB PID reverse error

  • Error message: FB PID reverse error
  • Possible cause: 
    • Operation failure of the Scanner Motor
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failure of Scanner Encoder reading
      • 2. Contamination of the Scanner Encoder
      • 3. Damage or skew of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100066?
    1.  Check the Scanner FFC for damage, disconnection or skew.
    2.  Replace the SCN Unit with a new one.
    3.  Replace the Main Board with a new one.

— Fix Epson WF 4830/4820 series error code 100001, 100005, 100010, click here

Fix Epson WF 4830/4820 series error code 100067, 100068

Solved FB PID lock error code 100067

Solved FB PID acceleration lock error code 100068

  • Possible cause: 
    • The Scanner Motor did not run
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failed to read the Scanner Encoder
      • 2. Contamination of the Scanner Encoder
      • 3. Damage or skew of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Scanner Motor
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100067, 100068?
    1.  Check the Scanner FFC for damage, disconnection or skew.
    2.  Replace the SCN Unit with a new one.
    3.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-wiper-driver-mechanism

Fix Epson WF 4830/4820 series error code 100069

Solved FB PID excess load error

  • Error message: FB PID excess speed error
  • Possible cause: 
    •  The Scanner Motor stopped running in the middle of the operation
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failed to read the Scanner Encoder
      • 2. Contamination of the Scanner Encoder
      • 3. Disconnection, break, skew or damage of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Scanner Motor (not completely broken).
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100069?
    1.  Check the Scanner FFC for damage, disconnection or skew.
    2.  Replace the SCN Unit with a new one.
    3.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 100070, 100078

Solved FB PID driving time error code 10070

Solved FB BS+ driving time error code 10078

  • No connector in use for this error code
  • Possible cause: 
    • Malfunction or crash of the firmware
  • How to fix Epson WF 4830, 4820 series error code 100070, 100078?
    1.  Turn the printer off and back it on.
    2.  If the error still occurs after the restart, replace the Main Board.

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

Fix Epson WF 4830/4820 series error code 100073, 100074, 100075, 100077

  • Connector in use:
    • Epson WF 4830 series:  CN606, CN601
    • Epson WF 4820 series:  CN801, CN804

Solved FB BS+ excess speed error code 100073

  • Error message: FB BS+ excess speed error
  • Possible cause: 
    • Failed to read the Scanner Encoder
      • 1. Contamination of the Scanner Scale
      • 2. Damage or skew of the Scanner FFC
      • 3. Failure of the Scanner Encoder
    • Failure of the Scanner Motor Driver
      • 4. Failure of the Main Board

Solved FB BS+ reverse error code 100074

  • Error message: FB BS+ reverse error
  • Possible cause: 
    • Operation failure of the Scanner Motor
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failed to read the Scanner Encoder
      • 2. Contamination of the Scanner Encoder
      • 3. Damage or skew of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Main Board

Solved FB BS+ lock error code 100075

  • Error message: FB BS+ lock error
  • Possible cause: 
    • The Scanner Motor did not run
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failed to read the Scanner Encoder
      • 2. Contamination of the Scanner Encoder
      • 3. Damage or skew of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Scanner Motor
      • 6. Failure of the Main Board

Solved FB BS+ excess load error code 100077

  • Error message: FB BS+ excess load error
  • Possible cause: 
    • The Scanner Motor stopped running in the middle of the operation
      • 1. The scanning operation was stopped by;
        • Disengaging of the Scanner CR
        • Disengaging of the Scanner Motor Pulley or cracking of the Scanner Motor Gears
    • Failed to read the Scanner Motor encoder
      • 2. Contamination of the Scanner Encoder
      • 3. Damage or skew of the Scanner FFC
      • 4. Failure of the Scanner Encoder
      • 5. Failure of the Scanner Motor (not completely broken).
      • 6. Failure of the Main Board

Epson-WF-4830-4820-series-ADF-Scanner-error-code-10007x

  • How to fix Epson WF 4830, 4820 series error code 100073, 100074, 100075, 100077?
    1.  Check the Scanner FFC for damage, disconnection or skew.
    2.  Replace the SCN Unit with a new one.
    3.  Replace the Main Board with a new one.

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF-4830/4820 error code 100065, 100066, 100074,… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-error-code-100065-100066-100074.html/feed 0
Fix Epson WF-4830/4820 error code 100016, 100020, 100054, 100077… https://wickeys.net/fix-epson-wf-4830-4820-error-code-100016-100020-100054-100077.html https://wickeys.net/fix-epson-wf-4830-4820-error-code-100016-100020-100054-100077.html#respond Mon, 03 May 2021 08:00:08 +0000 https://wickeys.net/?p=53 — Fix Epson XP 15000 | XP series error codes list, click here The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs. — …

The post Fix Epson WF-4830/4820 error code 100016, 100020, 100054, 100077… appeared first on Wic Reset Key.

]]>
— Fix Epson XP 15000 | XP series error codes list, click here

The fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. This product displays a printer fatal error code automatically on the panel LCD when a printer fatal error occurs.

Epson-WF-4830-4820-series-error-code-message

— Epson XP 15000 | XP series Adjustment Program, click here

  • Connector in use:
    • Epson WF 4830 series Main board:  CN606,  CN601
    • Epson WF 4820 series Main board:  CN801, CN804

Fix Epson WF 4830/4820 series error code 100016

Solved HP detection failure

  • Error message: HP detection failure
  • Possible cause: 
    • The Scanner CR could not return to its home.
      • 1. Damage or disengaging of Wheel Train of the Drive Mechanism
      • 2. Disengaging, fraying, jumping of the Timing Belt
    • Failed to read the white standard/home patterns.
      • 3. Disconnection, break, skew or damage of the Scanner FFC
      • 4. Failure of the CIS module
      • 5. Failure of the Scanner Housing
      • 6. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100016?
    1.  With the ADF Unit or the Document Cover opened, turn the power on.
    2.  Check if the CIS moves to the right to read the white standard/home patterns.
    3.  Check if the CIS’s emission color of the CIS is white (not greenish, reddish, or bluish).
      If the light does not look like white, check the Scanner FFC for
      damage, disconnection or skew.
    4.  Replace the SCN Unit with a new one.
    5.  Replace the Main Board with a new one

Fix Epson WF 4830/4820 series error code 100017

Solved Contact detection distance exceeded

  • Error message: Contact detection distance exceeded
  • Possible cause: 
    • The Scanner CR cannot completely reach the home (left side).
      • 1. Damage or disengaging of Wheel Train of the Drive Mechanism
    • Failure of Scanner Encoder reading
      • 2. Damage or skew of the Scanner FFC
      • 3. Failure of the CIS Module
      • 4. Failure of the Scanner Housing
      • 5. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100017?
    1.  With the Document Cover opened, turn the power on.
    2.  Check if the CIS (CR) reaches (comes in contact with) the right side.
    3.  Check the Wheel Train of the Drive Mechanism for damage.
    4.  Check the Scanner FFC for damage, disconnection or skew.
    5.  Replace the SCN Unit with a new one.
    6.  Replace the Main Board with a new one

Epson-WF-4830-4820-series-ADF-Scanner-error

— Solving Epson WF 4830/4820 Series error codes, click here

Fix Epson WF 4830/4820 series error code 100018

Solved Opposite side contact detection distance exceeded error

  • Error message: Opposite side contact detection distance exceeded error
  • Possible cause: 
    • The Scanner CR cannot completely reach the opposite side of the home (right side)
      • 1. Damage or disengaging of wheel train of the drive mechanism
    • Failed to read the Scanner Encoder
      • 2. Damage or skew of the Scanner FFC
      • 3. Failure of the CIS Module
      • 4. Failure of the Scanner Housing
      • 5. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100018?
    1.  With the Document Cover opened, turn the power on.
    2.  Check if the CIS (CR) reaches (comes in contact with) the right side.
    3.  Check the Wheel Train of the Drive Mechanism for damage.
    4.  Check the Scanner FFC for damage, disconnection or skew.
    5.  Replace the SCN Unit with a new one.
    6.  Replace the Main Board with a new one.

— Fix Epson WF 4830/4820 series error code 100001, 100005, 100010, click here

Fix Epson WF 4830/4820 series error code 100020

Solved Measurement error

  • No connector in use
  • Error message: Measurement error
  • Possible cause: 
    •  Overload of the Scanner Drive Mechanism
    •  Failure of the Scanner Motor
  • How to fix Epson WF 4830, 4820 series error code 100020?
    1.  Check if the CIS (CR) moves or not.
    2.  Check the Timing Belt for Damage or disengaging
    3.  Check the Wheel Train of the drive mechanism for damage.
    4.  Replace the SCN Unit with a new one.
    5.  Replace the Main Board with a new one.

Fix Epson WF 4830/4820 series error code 100032

Solved LED light failure

  • Connector in use:
    • Epson WF 4830 series: CN601
    • Epson WF 4820 series: CN801, CN804
  • Error message: Measurement error
  • Possible cause: 
    • Failure of the CIS LED light (RGB)
      1. Disconnection, break, skew or damage of the Scanner FFC
      2. Failure of the CIS Module
      3. Failure of the Main Board
  • How to fix Epson WF 4830, 4820 series error code 100032?
    1.  Check the color of the LED at power-on.
    2.  Check the Scanner FFC for damage, disconnection or skew.
    3.  Replace the SCN Unit with a new one.
    4.  Replace the Main Board with a new one.

Epson-WF-4830-4820-series-ADF-Scanner-error-code-list

Fix Epson WF 4830/4820 series error code 100054

Solved Paper jam error

  • Connector in use:
    • Epson WF 4830 series: CN601
    • Epson WF 4820 series: CN801, CN804
  • Error message: Paper jam error
  • Possible cause: 
    • No jammed paper is remaining but the sensor does not turn off
      1. Failure of the ADF PE Sensor
      2. Failure of the cable
    • Jammed paper is remaining
    • The Paper Feed Rollers and Paper Conveying Rollers slip too much
    • At power-on, during paper feed, during scanning
  • How to fix Epson WF 4830, 4820 series error code 100054?
    1.  Open the PGU LD ADF Assy and check if paper exist or not.
    2.  Open the ADF Document Support Cover and check if paper exist or not.
    3.  Open the ADF and check if paper exist or not.
    4.  Check if the paper sensor lever moves up and down.
    5.  Replace the ADF unit with a new one.
    6.  Replace the SCN Unit with a new one.
    7.  Replace the Main Board with a new one

— Epson WF 4830/4820 Series Printhead and Paper Feed, click here

— About Epson XP 15000 | XP series, click here

The post Fix Epson WF-4830/4820 error code 100016, 100020, 100054, 100077… appeared first on Wic Reset Key.

]]>
https://wickeys.net/fix-epson-wf-4830-4820-error-code-100016-100020-100054-100077.html/feed 0